Marco Cipher Lab 1560 Specifiche Pagina 60
- Pagina / 243
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
48
Enter Setup
1560 Series Barcode Scanner User Guide
1.11 AUTO-SENSE MODE (1560 ONLY)
This mode is only available when you want to seat the scanner in the Auto-Sense stand.
When you enable this mode, it will force the scanner to apply Laser mode as the scan
mode. However, it works slightly differently from the original Laser mode. Now the
scanner will be expecting barcodes as long as it is seated in the Auto-Sense stand, as
shown below. Whenever a barcode is brought within range, the scanner will be able to
decode it.
Note: Auto-sense can only be enabled for CCD scanner and will force it to Laser mode.
To stop this mode, you may remove the scanner from the stand or have the
scanner read the “Disable (Auto-Sense)” barcode below. It will return to Laser
mode. If Laser mode is not desired, proceed to select a scan mode best suits your
application.
Note: For Auto-Sense mode to work, you must connect both the power supply cord and
the interface cable to the Auto-Sense stand. USB power is insufficient.
Enable
*Disable
- 1560/1562 Barcode Scanne 1
- IMPORTANT NOTICES 3
- RELEASE NOTES 5
- CONTENTS 7
- INTRODUCTION 13
- SETTING UP 3656 15
- Introduction 17
- SYMBOLOGIES SUPPORTED 20
- QUICK START 23
- ENTER CONFIGURATION MODE 25
- EXIT CONFIGURATION MODE 25
- Quick Start 27
- Refer to Appendix III 30
- LIST THE CURRENT SETTINGS 31
- Chapter 1 35
- 1.1.2 POWER ECONOMY 36
- Chapter 1 39
- 1.2 MEMORY 41
- 1.2.1 TRANSMIT BUFFER 41
- 1.2.2 MEMORY MODE 42
- 1.3.1 GOOD READ LED 45
- 1.3.2 GOOD READ LED DURATION 45
- Beeping 46
- Meaning 46
- 1.4.1 BEEPER VOLUME 47
- 1.4.2 GOOD READ BEEP 48
- 1.4.3 LOW BATTERY ALARM 49
- 1.5 SEND “NR” TO HOST 50
- 1.6 SCAN MODES 51
- 1.6.6 ALTERNATE MODE 54
- 1.6.7 AIMING MODE 54
- 1.6.8 MULTI-BARCODE MODE 55
- 1.8 DELAY BETWEEN RE-READ 57
- Continuous mode 57
- Auto Power Off mode 57
- Alternate mode 57
- *Disable 60
- 1.13 NEGATIVE BARCODES 62
- 1.14 EFFECTIVE DECODING AREA 63
- 1.14.1 POSITIONING WINDOW 63
- 1.14.2 ADJUSTING WINDOW 64
- Chapter 2 65
- 2.1 BT HID 66
- 2.1.2 RESET CONNECTION 68
- US Keyboard Style – Normal 70
- 70
- Cap Lock Type Description 72
- Alphabets Transmission 74
- 2.1.4 INTER-CHARACTER DELAY 76
- 2.1.5 INTER-FUNCTION DELAY 76
- 2.2 BT SPP SLAVE 78
- 2.2.2 INTER-FUNCTION DELAY 78
- 2.2.3 ACK/NAK TIMEOUT 79
- 2.3 BT SPP MASTER 80
- “Set Connection” 80
- “MAC ID” 80
- 2.3.2 INTER-FUNCTION DELAY 82
- 2.3.3 ACK/NAK TIMEOUT 83
- 2.4 KEYBOARD WEDGE VIA 3656 84
- 2.4.3 INTER-CHARACTER DELAY 94
- 2.4.4 INTER-FUNCTION DELAY 94
- 2.5 RS-232 VIA 3656 95
- 2.5.2 BAUD RATE 95
- 2.5.3 DATA BITS 96
- 2.5.4 PARITY 96
- 2.5.5 STOP BIT 97
- 2.5.6 FLOW CONTROL 97
- 2.5.7 INTER-CHARACTER DELAY 98
- 2.5.8 INTER-FUNCTION DELAY 98
- 2.5.9 ACK/NAK TIMEOUT 99
- 2.6 USB HID VIA 3656 100
- Chapter 2 101
- Selecting Output Interface 101
- Enter Setup 106
- *Capital Lock OFF 106
- 2.6.3 INTER-CHARACTER DELAY 109
- 2.6.4 INTER-FUNCTION DELAY 109
- 2.7.2 INTER-FUNCTION DELAY 111
- 2.7 USB VIRTUAL COM VIA 3656 111
- 2.7.3 ACK/NAK TIMEOUT 112
- Chapter 3 113
- 3.1 CONNECTING VIA 3656 114
- 3.1.1 CONNECT TO 3656 114
- “Set Connection” label 114
- “Serial Number” label 114
- 3.1.2 CHANGE INTERFACE 115
- Sniff Mode (Power-saving) 116
- 3.2 CONNECTING VIA BLUETOOTH 117
- DONGLE 117
- 3.2.1 CHANGE INTERFACE 117
- 107 119
- Authentication 119
- 3.2.3 CONNECT TO DONGLE 121
- Chapter 3 123
- Chapter 4 129
- 4.1 CODABAR 130
- 4.1.3 CLSI CONVERSION 131
- 4.2 CODE 25 – INDUSTRIAL 25 132
- 4.2.2 VERIFY CHECK DIGIT 133
- 4.2.3 TRANSMIT CHECK DIGIT 133
- 4.3 CODE 25 – INTERLEAVED 25 135
- 4.3.2 VERIFY CHECK DIGIT 136
- 4.3.3 TRANSMIT CHECK DIGIT 136
- Chapter 4 137
- Changing Symbology Settings 137
- 4.4 CODE 25 – MATRIX 25 138
- 4.4.2 VERIFY CHECK DIGIT 139
- 4.4.3 TRANSMIT CHECK DIGIT 139
- 4.5 CODE 39 141
- 4.5.2 VERIFY CHECK DIGIT 141
- 4.5.3 TRANSMIT CHECK DIGIT 142
- 4.6 CODE 93 143
- 4.7 CODE 128 143
- 4.8 EAN-8 144
- 4.8.1 CONVERT TO EAN-13 145
- 4.8.2 TRANSMIT CHECK DIGIT 145
- 4.9 EAN-13 146
- 4.9.1 ISBN CONVERSION 147
- 4.9.2 ISSN CONVERSION 147
- 4.9.3 TRANSMIT CHECK DIGIT 147
- 4.9.4 SECURITY LEVEL 148
- 4.10 GS1-128 (EAN-128) 149
- 4.10.1 CODE ID TRANSMISSION 149
- 4.11 ISBT 128 150
- 4.12 MSI 151
- 4.12.1 VERIFY CHECK DIGIT 151
- 4.12.2 TRANSMIT CHECK DIGIT 151
- 4.13 FRENCH PHARMACODE 153
- 4.13.1 TRANSMIT CHECK DIGIT 153
- 4.14 ITALIAN PHARMACODE 154
- 4.14.1 TRANSMIT CHECK DIGIT 154
- 4.15 PLESSEY 155
- 4.15.1 CONVERT TO UK PLESSEY 155
- 4.15.2 TRANSMIT CHECK DIGIT 155
- GS1 DataBar Expanded 159
- Transmit Code ID 160
- Transmit Application ID 160
- Transmit Check Digit 160
- 4.17 TELEPEN 161
- 4.18 UPC-A 162
- 4.18.1 CONVERT TO EAN-13 163
- 4.18.3 TRANSMIT CHECK DIGIT 163
- 4.19 UPC-E 164
- 4.19.4 TRANSMIT CHECK DIGIT 166
- Chapter 5 167
- Chapter 5 169
- Defining Output Format 169
- 5.4.2 CHANGE CODE ID 179
- 5.4.3 CLEAR CODE ID SETTINGS 180
- 5.5 LENGTH CODE 181
- 5.6 MULTI-BARCODE EDITOR 185
- Code Type 185
- Remove Special 188
- Character 188
- Chapter 6 189
- 6.1.2 EXCLUSIVE DATA EDITING 191
- End Programming Format 192
- 6.2.2 RESTORE DEFAULT FORMAT 194
- 6.3.1 APPLICABLE CODE TYPE 195
- 189 201
- 6.3.2 DATA LENGTH 202
- 6.4.3 TOTAL NUMBER OF FIELDS 205
- 6.4.4 FIELD SETTINGS 206
- Field 3 Setting 208
- 197 209
- Field 4 Setting 209
- Field 5 Setting 210
- 199 211
- Additional Fields 211
- Key Type Key Status 211
- 6.4.5 PAUSE FIELD SETTING 212
- 6.6 PROGRAMMING EXAMPLES 215
- 6.6.1 EXAMPLE I 215
- SPECIFICATIONS 217
- Appendix I 219
- Click [OK] 220
- Appendix I Firmware Upgrade 221
- USING BLUETOOTH 222
- HOW TO UPGRADE 3656 FIRMWARE 224
- Appendix II 229
- Appendix II 231
- Host Serial Commands 231
- 3656 SERIAL COMMAND TABLE 232
- EXAMPLE 234
- Appendix III 235
- KEY TYPE & STATUS 236
- KEY TYPE 236
- KEY STATUS 236
- Appendix IV 239
- HEXADECIMAL SYSTEM 240
- ASCII TABLE 241
- USE PRESET PIN 242
© 2020, manymanuals.it. Tutti i diritti riservati | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale